Data simulation methods
Set tag simulation behavior in the Simulator field of Tag Editor.
| Method | Description |
|---|---|
|
Variables |
Data is stored in a simulator variable. This variable holds the value of the tag so you can read and write the value. |
|
SawTooth |
A count value is incremented from Offset to Amplitude + Offset value with a Period of 60..3600 seconds. When the counter reaches Amplitude + Offset, the value is reset to Offset and the counter restarts. |
|
Sine Wave |
A sine wave value is generated and written to the tag value. Min, Max and Period values can be defined for each tag. |
|
Triangle Wave |
A triangle wave value is generated and written to the tag value. Min, Max and Period values can be defined for each tag. |
|
Square Wave |
A square wave value is generated and written to the tag value. Min, Max and Period values can be defined for each tag. |
See "Adding tags" for details.
Keep Stored
When the "Keep Stored" flag on the toolbar is set to true, the configured simulations will be kept even after closing and reopening the simulator.